Flying-Hobby
CRANKSHAFT LOCKING TOOL: 30-90 HELIS - ORANGE
Features:, Made of durable engineering plastic, it locks the crankshaft without risk of damage to any part of the engine., Requires:, Removing coverplate or pull starter from the rear of the engine., Instructions:, Remove the crankcase rear coverplate from the engine and rotate the crankshaft to the bottom-dead-center position. Insert the crankshaft clamp so that its grooved portion surrounds the crankpin and lower end of the connecting-rod, and securely tighten the flywheel, fan or pilot shaft onto the crankshaft. Remove crankshaft clamp when completed and re-install the coverplate back onto the engine.,
This device facilitates the installation or removal of a flywheel, ...Flying-Hobby
CRANKSHAFT LOCKING TOOL: 30-90 HELIS - BLUE
Features:, Made of durable engineering plastic, it locks the crankshaft without risk of damage to any part of the engine., Requires:, Removing coverplate or pull starter from the rear of the engine., Instructions:, Remove the crankcase rear coverplate from the engine and rotate the crankshaft to the bottom-dead-center position. Insert the crankshaft clamp so that its grooved portion surrounds the crankpin and lower end of the connecting-rod, and securely tighten the flywheel, fan or pilot shaft onto the crankshaft. Remove crankshaft clamp when completed and re-install the coverplate back onto the engine.,
This device facilitates the installation or removal of a flywheel, ...Flying-Hobby
RAPTOR 90G4 FLYBARLESS NITRO KIT 4894-K10
| INCLUDES | Flybarless Raptor 90G4 Helicopter Kit with FRP Canopy, Main and |
| REQUIRES | Engine |
| Radio | At least 6-channel with receiver battery |
| Gyro | Flybarless 3 axis |
| Main Blades | 690mm or 710mm carbon fiber |
| Fuel | Heli blend, 15-30% |
| Engine Starter | Electric starter with extended 6mm starting tool |
| SPECS | Fuselage Length |
| Main Rotor Diameter | 62.4" (1584mm) |
| Tail Rotor Diameter | 11" (280mm) |
| Weight (Fully Equipped) | 9.7lb (4400g) |
| Height | 16.9" (430mm) |
Shipping Fee Discount Included :, Gear Ratio: 1:7.92: 4.67 (fixed ratio),
Header Tanks, Tail Boom and Instruction Manual Tools and field ...Flying-Hobby
ROTOR TECH CARBON FLYBAR PADDLE (4MM) FOR 46-91 HELI
| Flybar Dia. | 4mm |
| Weight | less than 20g |
Flying-Hobby
T-REX 600E PRO DFC FUTABA 6J 2.4G RTF COMBO
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 1174mm |
| ● Height | 319mm |
| ● Width | 210mm |
| ● Main Blade Length | 600mm |
| ● Main Rotor Diameter | 1347mm |
| ● Tail Rotor Diameter | 260mm |
| ● Motor Drive Gear | 13T |
| ● Main Drive Gear | 112T |
| ● Autorotation Tail Drive Gear | 131T |
| ● Tail Drive Gear | 34T |
| ● Weight(With Motor) | 2290g |
Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., Specification(3GX Programmable Flybarless System) :, Specification(T-REX 600E PRO DFC) :, ●Features, Specification(T-REX 600E PRO DFC) :, ● Drive Gear Ratio: 1:8.61:3.85, Accessories:, ●T-REX 600E PRO DFC Kits Set X1, Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),
T-REX 600E PRO DFC 1 Castle ICE2 HV 80 Brushless ...Flying-Hobby
T-REX 500PRO DFC FUTABA 8J RTF COMBO (DFC VERSION)
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 868mm |
| ● Height | 275mm |
| ● Main Blade Length | 425mm |
| ● Main Rotor Diameter | 978mm |
| ● Tail Rotor Diameter | 206mm |
| ● Motor Drive Gear | 12T |
| ● Main Drive Gear | 134T |
| ● Autorotation Tail Drive Gear | 145T |
| ● Tail Drive Gear | 36T |
| ● Weight(With Motor) | 1210g |
Remark :, All T-REX 500 DFC Combo have change to this canopy -, Combo Included :, ●T-REX 500PRO DFC Kits Set X1, Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., 3GX Programmable Flybarless System:, T-REX 500 PRO DFC:, ●Features, :, ● Drive Gear Ratio: 1:11.17:4.03,
HC5112 ●3GX Flybarless System X1 set ●425 3G Carbon fiber ...Flying-Hobby
ROTORTECH 810MM CARBON FIBER MAIN BLADES (YELLOW)
| Length | 810mm |
| Width | 65mm |
| Weight | 235-240g |
| Grip | 16mm |
| Hole | 5mm |
| Airfoil | Symmetrical |
| Tip | Angled |
| Make | Carbon Fiber |
| Common Application | Large Gas Powered RC Helicopters |
Specifications:, , RotorTech™ Standard Features:,
Product Details Specially designed for big 23-26cc gasoline industry camera ...Flying-Hobby
ROTORTECH 600MM CF BLADES (T-REX 600)
| Length | 600mm |
| Width | 55mm |
| Weight | 140gm |
| C.G. | 23% |
| Grip | 12mm |
| Hole | 4mm |
| Airfoil | Symmetrical |
| Tip | Angled |
| Make | Carbon Fiber |
| Common Application | 46-50 Size RC Helicopters |
Specifications:, Includes:, 1x 3D/holographic decal sheet, RotorTech™ Standard Features:, Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.,
4x washers Low parasitic drag coeficient due to the efficient ...Flying-Hobby
ROTORTECH 810MM CARBON FIBER MAIN BLADES (BLACK)
| Length | 810mm |
| Width | 65mm |
| Weight | 235-240g |
| Grip | 16mm |
| Hole | 5mm |
| Airfoil | Symmetrical |
| Make | Carbon Fiber |
| Common Application | Large Gas Powered RC Helicopters. |
RotorTech™ Standard Features:,
Product Details Safety wire runs alone the inner core of ...Flying-Hobby
T-REX 500PRO DFC JR XG8 RTF COMBO (DFC VERSION)
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 868mm |
| ● Height | 275mm |
| ● Main Blade Length | 425mm |
| ● Main Rotor Diameter | 978mm |
| ● Tail Rotor Diameter | 206mm |
| ● Motor Drive Gear | 12T |
| ● Main Drive Gear | 134T |
| ● Autorotation Tail Drive Gear | 145T |
| ● Tail Drive Gear | 36T |
| ● Weight(With Motor) | 1210g |
Remark :, All T-REX 500 DFC Combo have change to this canopy -, Combo Included :, ●T-REX 500PRO DFC Kits Set X1, Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., 3GX Programmable Flybarless System :, Specification(T-REX 500 PRO DFC) :, ●Features, Specification(T-REX 500 PRO DFC) :, ● Drive Gear Ratio: 1:11.17:4.03,
HC5112 ●3GX Flybarless System X1 set ●425 3G Carbon fiber ...Flying-Hobby
ROTOR TECH 620MM CARBON FIBER SYMMETRICAL MAIN BLADES
| Length | 620mm |
| Width | 59mm |
| Weight | 135-140g |
| Grip | >12mm |
| Hole | 4-5mm |
| Airfoil | Symmetrical |
| Tip | Aeroflat |
| Make | Carbon Fiber |
| Common Application | 50 size RC Helicopters |
Specifications:, , Includes:, , RotorTech™ Standard Features:,
1x 3D/holographic decal sheet 4x 1mm thick washers 4x 2mm ...Flying-Hobby
700 CNC GEARS ASSEMBLY
| ●Weight | 140g |
Instruction:, ●Use for T-REX 700 Nitro Pro., Specification:, ●CNC Main Drive Gear/115T x 1,
●M1 Autorotation tail drive gear/104T x 1 ●M1 Engine gear ...Flying-Hobby
T-REX 500PRO DFC SUPER COMBO (WITH 3GX VERSION)
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 868mm |
| ● Height | 275mm |
| ● Main Blade Length | 425mm |
| ● Main Rotor Diameter | 978mm |
| ● Tail Rotor Diameter | 206mm |
| ● Motor Drive Gear | 12T |
| ● Main Drive Gear | 134T |
| ● Autorotation Tail Drive Gear | 145T |
| ● Tail Drive Gear | 36T |
| ● Weight(With Motor) | 1210g |
Remark :, All T-REX 500 DFC Combo have change to this canopy -, Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., Specification(3GX Programmable Flybarless System) :, Specification(T-REX 500 PRO DFC) :, ●Features, Specification(T-REX 500 PRO DFC) :, ● Drive Gear Ratio: 1:11.17:4.03, Accessories:, ●T-REX 500PRO DFC Kits Set X1, Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),
HC5112 ●3GX is currently the smallest and lightest flybarless system ...Flying-Hobby
BUBBLELESS CLUNK
,
Plated throughout to prevent corrosion Mesh design prevents bubbles from ...Flying-Hobby
GRYPHON AUTO BOOSTER REMOTE OPERATED GLOW IGNITER
| - Operating Voltage | 4.8V to 7.4V, User Selectable |
| - Idle Current Drain | 20mA |
| - Working Current Drain | 650mA |
| - Size | 10mm x 40mm x 23mm (HxWxL) |
| - Weight | 20g With Cables |
Overview:, The Gryphon Auto Booster is a remote operated glow ignition device. Sleek design encased in a durable plastic shell, the Auto Booster tends to make a nice addition to any Nitro helicopter, airplane car, or even boat for easy glow plug ignition., Specs:, Features:, - Glow plug can be remotely ignited with a transmitter by using a receiver channel (Gear, AUX, etc),
- The glow ignition operation can increase engine power rapidly ...